74922 IC 16-Key Encoder

The MM74C922 CMOS key encoders provide all the necessary logic to fully encode an array of SPST switches. The keyboard scan can be implemented by either an external clock or an external capacitor. These encoders also have on-chip pull-up devices that permit switches with up to 50 k on resistance to be used. No diodes in the switch array are needed to eliminate ghost switches. The internal debounce circuit needs only a single external capacitor and can be defeated by omitting the capacitor. A Data Available output goes to a high level when a valid keyboard entry has been made. The Data Available output returns to a low level when the entered key is released, even if another key is depressed. The Data Available will return high to indicate acceptance of the new key after a normal debounce period; this two-key rollover is provided between any two switches.

An internal register remembers the last key pressed even after the key is released. The 3-STATE outputs provide for easy expansion and bus operation and are LPTTL compatible.

Features:

50 k maximum switch on resistance

On or off-chip clock

On-chip row pull-up devices

2 key roll-over

Key bounce elimination with a single capacitor

The last key register at the outputs

3-STATE output LPTTL compatible

Wide supply range: 3V to 15V

Low power consumption

Absolute Maximum Ratings

The voltage at Any Pin: VCC 0.3V to V CC + 0.3V

Operating Temperature Range MM74C923: 40C to +85C

Storage Temperature Range: 65C to +150C

Power Dissipation (P D)

Dual-In-Line: 700 mW

Small Outline: 500 mW

Operating VCC Range: 3V to 15V

VCC: 18V

74922 IC Datasheet