Microchip Technology Operational Amplifier Part #MCP664T-E/ST | IC | DEX

Microchip Technology Operational Amplifier Part #MCP664T-E/ST

The Microchip Technology Inc. MCP660/1/2/3/4/5/9 family of operational amplifiers (op amps) features high gain-bandwidth product and high slew rate. Some also provide a Chip Select pin (CS) that supports a low power mode of operation. These amplifiers are optimized for high speed, low noise and distortion, single-supply operation with rail-to-rail output and an input that includes the negative rail. This family is offered in single (MCP661), single with CS pin (MCP663), dual (MCP662) and dual with two CS pins (MCP665), triple (MCP660), quad (MCP664) and quad with two CS pins (MCP669). All devices are fully specified from -40C to +125C.

Features:

• Gain-Bandwidth Product: 60 MHz (typical)
• Slew Rate: 32 V/s (typical)
• Noise: 6.8 nV/Hz (typical, at 1 MHz)
• Short Circuit Current: 90 mA (typical)
• Low Input Bias Current: 4 pA (typical)
• Ease of Use:
• Unity-Gain Stable
• Rail-to-Rail Output
• Input Range including Negative Rail
• No Phase Reversal
• Supply Voltage Range: +2.5V to +5.5V
• High Output Current: 70 mA
• Supply Current: 6.0 mA/ch (typical)
• Low-Power Mode: 1 A/ch
• Small Packages: SOT23-5, DFN
• Extended Temperature Range: -40C to +125C

Typical Applications:

• Multi-Pole Active Filter
• Driving A/D Converters
• Power Amplifier Control Loops
• Line Driver
• Video Amplifier
• Barcode Scanners
• Optical Detector Amplifier

MCH:MCP664T-E/ST

MCP664T-E/ST