he 1N4007 (often referred to by its surface-mount equivalent code, M7) is one of the most widely used general-purpose silicon rectifier diodes. It is designed to allow current to flow in only one direction while blocking it in the other, making it a fundamental component in power conversion and protection circuits.
| Parameter | Rating |
| Peak Repetitive Reverse Voltage ($V_{RRM}$) | 1000 V |
| Average Rectified Forward Current ($I_O$) | 1.0 A |
| Non-Repetitive Peak Surge Current ($I_{FSM}$) | 30 A (for 8.3ms) |
| Forward Voltage Drop ($V_F$) | ~1.1 V (at 1A) |
| Reverse Leakage Current ($I_R$) | 5 A |
| Package Type | DO-41 (Axial) / DO-214AC (SMA/SMD) |
1N4007 vs. M7:
1N4007: Usually refers to the through-hole, axial leaded version.
M7: This is the industry-standard marking code for the SMD (Surface Mount Device) version, typically in an SMA (DO-214AC) package. They share identical electrical characteristics.
High Voltage Rating: With a 1000V peak reverse voltage, it is highly versatile for AC-to-DC rectification tasks, even at high-voltage mains levels.
Polarity: Like all diodes, it has a polarity. The end with the band (stripe) represents the Cathode (-), while the other end is the Anode (+).
AC-to-DC Rectification: Converting alternating current from a transformer output into direct current for power supplies.
Freewheeling/Flyback Diode: Placed in parallel with inductive loads (like relays or motors) to suppress high-voltage spikes that occur when the power is suddenly turned off.
Reverse Polarity Protection: Used in series with a power supply input to prevent damage if a user accidentally connects the power source backwards.
Signal Clipping: Simple clamping applications where you need to limit the voltage level of a signal.
Speed: The 1N4007/M7 is a standard recovery diode, not a Fast Recovery or Schottky diode. It is meant for low-frequency applications (typically 5060 Hz). It is not suitable for high-frequency switching power supplies, as its slow recovery time will cause significant heating and efficiency loss.
Heat Dissipation: While it is rated for 1A, the forward voltage drop causes power dissipation ($P = V_F imes I$). At 1A, it dissipates about 1.1 Watts. If you are operating near the maximum current limit, ensure your PCB design includes adequate copper traces for heat sinking.
More styles you’ll love.
Reviews (0)
There are no reviews yet.