Onsemi Configurable 3.0A PWM step down converter Part #NCV91300-D | Converter | DEX

The NCV91300-D is a synchronous PWM buck converter optimized to supply the different sub systems of automotive applications post regulation system from 2.0 V up to 5 V input. The device is able to deliver up to 3.0 A, with programmable output voltage from 0.6 V to 3.3 V. Operation at up to 2.15 MHz switching frequency allows the use of small components. Synchronous rectification and automatic PFM-PWM transitions improve overall solution efficiency. The NCV91300-D is housed in low profile 3.0 x 3.0 mm QFNW-16 package.

Features

• Power Input voltage range from 1.9 V to 5.5 V
• Analog Input voltage range from 3.0 V to 5.5 V
• Power capability : 3.0 A at TA = 105 C
• Programmable output voltage: 0.6 V to 3.3 V in 5 mV, 10 mV and 20 mV steps
• Up to 2.15 MHz switching frequency with on chip oscillator – Spread spectrum or Sync input pin
• Uses 1.0 H inductor and at least 20 F capacitors
• PFM/PWM operation for optimum efficiency – Low 65 uA quiescent current
• I2C control interface with interrupt and Dynamic Voltage Scaling support

Benefits

• Wide power input voltage range – Separate Analog and Power supply: Flexibility
• Wide power input voltage range – Separate Analog and Power supply: Flexibility
• Suitable for microprocessor / controller power supply
• Flexibility – Digital Voltage Scaling (DVS) Ready
• Allows small inductor – reduced peak EMI signature
• Optimized footprint area and total solution thickness
• High efficiency solution
• Flexibility

Applications

• Automotive Point Of Load (POL)
• Automotive Telematics Clusters Camera
• Automotive Infotainment – Instrumentation
• Automotive Advanced Driver-Assistance System (ADAS)
• Automotive Space-Optimized systems

End Products

• Automotive Advanced Driver-Assistance System (ADAS) Systems
• Front Camera Rear View Camera – Surround view Camera
• Blind Spot Monitoring
• Radar / Lidar

ONS:NCV91300-D

NCV91300-D