PIC16F676 14-Pin FLASH-Based 8-Bit CMOS Microcontrollers

product-image-0
27

PIC16F676 14-Pin FLASH-Based 8-Bit CMOS Microcontrollers

$8.00 $11.00

PIC16F676 is a MICROCHIP TECHNOLOGY microcontroller from the 'PIC16F' series. It is an 8-Bit CMOS Microcontroller that is widely used…

Category: Others
SKU: EAK75498193210

PIC16F676 is a MICROCHIP TECHNOLOGY microcontroller from the ‘PIC16F’ series. It is an 8-Bit CMOS Microcontroller that is widely used by hobbyists and engineers owing to its functionality, low cost, and tiny size.Because of its rapid flash memory rewrite cycle, the PIC16F676 is an excellent microcontroller for learning and experimentation for engineers. The controller features 2KBytes of flash memory, which is sufficient for beginners to create simple Applications. Furthermore, the 12 GPIO are intended to handle 20mA current (LED driving capacity), allowing beginners to connect the peripheral with less care.The PIC16F676 has minimal functionality and cannot be utilized to create complex Applications. It is used for building simple Applications (such as display drivers) as well as programs by beginners who wish to get started with the microcontroller platform.

Features

  • Power saving SLEEP mode Wide operating voltage range – 2.0V to 5.5V
  • Industrial and Extended temperature range
  • Low power Power-on Reset (POR)
  • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Brown-out Detect (BOD)
  • Watchdog Timer (WDT) with independent oscillator for reliable operation
  • Multiplexed MCLR/Input-pin Interrupt-on-pin change
  • Individual programmable weak pull-ups
  • Programmable code protection
  • High Endurance FLASH/EEPROM Cell
Specification
CPU 8-bit
Total number of pins 14
Programmable pins 12
Communication Interface ICSP or In-Circuit Serial Programming Interface (13,14 Pins) [Can be used for programming this controller]
ADC Feature 8 channels of 10-bit resolution
Timer Feature One 8-bit counter, One 16-bit counter
PWM channels Not available
Analog Comparator Available-1
External Oscillator Up to 20MHz
Internal Oscillator 4MHz Internal R-C Oscillator factory calibrated to 1%
Program memory / Flash memory 2Kbytes[100000 write/erase cycles]
CPU Speed 1MIPS @ 1MHz
Watchdog Timer Available and is featured with IndependentOscillator for Reliable Operation
Power Save Modes Available
Operating Voltage 2.0V to 5.5V
Maximum current to any I/O pin IN: 25mAOUT: 25mA
Operating Temperature -40C to +125C
Maximum current into VDD pin 250mA

Reviews (0)

There are no reviews yet.

Your Review