CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor

This is the CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor. In a single 8-pin package, the APDS-9930 provides digital ambient light sensing (ALS), an IR LED, and a comprehensive proximity detection system. The proximity function provides plug-and-play detection up to 100 mm (without front glass), obviating the need for end equipment or sub-assembly factory calibration.
From broad sunlight to dark interiors, the proximity sensing feature works wonderfully. The large dynamic range also enables operation behind dark glass, such as a cell phone, enabling short-range detection. An inbuilt state machine allows the device to enter a low-power mode in between ALS and proximity readings, resulting in extremely low average power consumption. In very low light or behind a dark faceplate, the ALS delivers a photopic response to light intensity.

Features :

• Approximate human visual response
• Programmable interrupt capability with upper and lower thresholds
• Up to 16-bit resolution
• High sensitivity operation behind dark glass
• 0.01lux low lumen performance

Proximity detection

• Fully calibrated to 100 mm detection
• Integrated infrared LED and synchronous LED driver
• Eliminates factory calibration of the proximity sensor

Programmable wait timer

• Wait for state power consumption 90A typical
• Programmable range from 2.7 ms to more than 8 seconds
• I2C interface compatible
• Up to 400kHz (I2C fast mode)
• Dedicated interrupt pin.

Specification